Good news | JPT won another industry award
On August 28th, the award ceremony for the "Weike Cup • OFweek 2024 Laser Industry Annual Selection", hosted by OFweek Weike Network, was grandly held in Shenzhen.
JPT's 300W Mopa Fiber Green Laser and Square Beam Output Semiconductor Laser were respectively honored with the Best Fiber/Disc Laser Technology Innovation Award and the Best Laser Industry Application Case Award.
Following the "Red Light Award," JPT's 300W Mopa Fiber Green Laser once again received industry recognition. This not only demonstrates high recognition for JPT's Mopa laser technology but also provides strong affirmation of JPT's laser technical strength.
OFweek 2024 Laser Industry Annual Selection
Ms. CC, JPT's Marketing Director, received the award as a representative (5th from left)
01
✦ 300W Mopa fiber green laser
JPT 300W Mopa fiber green laser can be used for low-energy fine processing such as power battery welding, liquid film cutting, and photovoltaic cell slotting. The principle is to use the gain-switch semiconductor laser as the seed source to generate nanosecond short pulses, use polarization-maintaining double-clad fiber and multi-mode semiconductor laser to construct polarization-maintaining fiber amplifier, and use multi-stage pulse amplification technology, cladding pump beam combination technology and large-mode field special fiber fusion technology to achieve 100-watt near-infrared pulse output. The LBO crystal is used as a frequency doubling device to control the near-infrared pulse parameters and match the design crystal parameters, and the near-single-mode green Mopa laser output with an average power of 300W is realized through extracavity frequency doubling.
JPT 300W Mopa Fiber Green Laser
02
✦ Rectangular spot output diode laser
The square spot output semiconductor laser is a semiconductor laser independently developed and produced by JPT for defect detection of photovoltaic cells. The principle is to use the intact silicon structure to produce near-infrared fluorescence due to laser induction, and capture the fluorescence imaging through the near-infrared photosensitive camera, and analyze the image through the imaging effect to judge whether the silicon wafer is qualified. Using air-cooled heat dissipation mode, real-time monitoring of semiconductor laser temperature, over-temperature protection and other functions, output frequency, duty cycle, output power and other related parameters can be set, the output head is with the area array lens to achieve uniform area array spot output, compared with linear lasers, area array lasers can perfectly detect the defects of light and dark silicon wafers in photovoltaic applications, and can meet 7x24h continuous work.
JPT Rectangular spot output diode laser
As China's first commercial manufacturer of high-power fiber lasers with adjustable pulse width, JPT will continue to deepen its core laser technology, focus on laser core modules, and provide customers with laser solutions in key areas such as consumer electronics and new energy, so as to help customers achieve intelligent manufacturing.
Recommended content
"The Unseen Champion" Chronicle: JPT Strives to be the Leader in the Laser Technology Subdivision
DateTime:2024/08/30
Good news | JPT won another industry award
DateTime:2024/08/29
Good News | JPT Once Again Awarded National Manufacturing Industry Champion, Laser Resistor Technology Attracts Global Attention
DateTime:2024/08/19
Professor Tomasz R. Woliński, President of the Polish Photonics Society, and Professor Ping Shen from the Southern University of Science and Technolog
DateTime:2024/08/08
Deepening Core Technology! JPT Laser Attends the 15th National Laser Processing Industry Forum and delivers a keynote speech
DateTime:2024/07/15